Sunday, August 15, 2021

2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 2454


Fault present in control module Transmission



Possible cause:



- Fault present in control module Transmission



Affected functions:



- Engine diagnosis



- Automatic transmission Function



-------------------------------------------------



Test 1: Check component N15/3 (ETC [EGS] control unit).



1. Check component N15/3 (ETC [EGS] control unit).



Read out fault memory of transmission control unit and process stored fault codes.



Possible cause and remedy



- Read out fault memory of transmission control unit and process stored fault codes.



End of test



E1853



Fault present in control module Transmission



Possible cause:



- Fault present in control module Transmission



Affected functions:



- Engine diagnosis



- Automatic transmission Function



-------------------------------------------------



Test 1: Check component N15/3 (ETC [EGS] control unit).



1. Check component N15/3 (ETC [EGS] control unit).



Read out fault memory of transmission control unit and process stored fault codes.



Possible cause and remedy



- Read out fault memory of transmission control unit and process stored fault codes.



End of test



Part 1



No CAN message was received from control unit N118 (Fuel pump control module).



Possible cause:



- This fault can be ignored and erased.



Affected functions:



- Power generation



-------------------------------------------------



Test 1: This fault can be ignored and erased.



Test 2: Engine compartment CAN test



1. This fault can be ignored and erased.



Note:This fault can be ignored and erased.

No comments:

Post a Comment