- Check the CAN communication with control unit A1 (Instrument cluster).
- Interior CAN bus
Affected functions:
- Fuel level indicator
- Engine running
-------------------------------------------------
Test 1: Interior CAN bus
Test 2: CAN communication is faulty.
Test 3: Check component N10 (SAM control unit).
1. Interior CAN bus
Warning!Communication with ECU required.
2. CAN communication is faulty.
Test 2.1: Check the CAN communication with control unit A1 (Instrument cluster).
2.1. Check the CAN communication with control unit A1 (Instrument cluster).
Test 2.1.1: Check the CAN communication with control unit.
2.1.1. Check the CAN communication with control unit.
Warning!Communication with ECU required.
3. Check component N10 (SAM control unit).
Possible cause and remedy
- Read out fault memory of control unit N10/2 (Rear SAM control unit with fuse and relay module).
End of test
2349
Component G3/4 (Right O2 sensor, before TWC [KAT]) has a malfunction.
Possible cause:
- Check exhaust system for leaks.
Affected functions:
- Power generation
-------------------------------------------------
Test 1: Check exhaust system for leaks.
1. Check exhaust system for leaks.
Warning!Communication with ECU required.
2350
Component G3/4 (Right O2 sensor, before TWC [KAT]) has a malfunction.
Possible cause:
- Check exhaust system for leaks.
No comments:
Post a Comment