2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 2131

1.1.3.4.1.2. Cruise control

Warning!Communication with ECU required.

1.1.3.4.1.3. Drive authorization

Warning!Communication with ECU required.

1.1.3.4.1.4. Control unit-specific actual values :

1.1.3.4.1.4. No further information available.

1.1.3.4.1.5. Electronic selector module

Warning!Communication with ECU required.

1.1.3.4.1.6. Transmission control

Warning!Communication with ECU required.

1.1.3.4.1.7. Motor electronics

Warning!Communication with ECU required.

1.1.3.4.1.8. Steering column module

Warning!Communication with ECU required.

2. Check component N47-5 (ESP control unit).

Possible cause and remedy

- Read out fault memory of control unit N47-5 (ESP control unit).

End of test

Part 1

Monitoring of signal 'Torque request' by control unit Transmission has stopped.

Possible cause:

- N15/3 (ETC [EGS] control unit)

Affected functions:

- Automatic transmission Function

-------------------------------------------------

Test 1: Engine compartment CAN test

Test 2: Check component N15/3 (ETC [EGS] control unit).

1. Engine compartment CAN test

Test 1.1: Engine compartment CAN test

1.1. Engine compartment CAN test

Test 1.1.1: Procedure in case of CAN faults

Test 1.1.2: Read current CAN configuration and CAN fault codes