2010 Cadillac Truck SRX AWD V6-3.0L Page 564

2010 Cadillac Truck SRX AWD V6-3.0L Page 564

DTC B2500

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions)provides an overview of each diagnostic category.

DTC Descriptor

DTC B2500 00

- Driver Exterior Unlock Switch Circuit

Diagnostic Fault Information

Circuit/System Description

The driver window switch monitors the voltage level of the key switch unlock signal circuit. When the key is inserted into the driver door key

cylinder and turned to the Unlock position, a switch within the driver door latch closes causing the voltage to drop within the key switch unlock

signal circuit. The driver window switch will detect the drop in voltage and will send a serial data message to the BCM commanding all the doors

to unlock.

Conditions for Running the DTC

* The ignition is ON.

* The system voltage is 9-16 V.

Conditions for Setting the DTC

The BCM detects a short to ground on the driver door key switch signal circuit.

Action Taken When the DTC Sets

The BCM will ignore the unlock command from the key cylinder switch.

Conditions for Clearing the DTC

* This DTC will be current for as long as the fault is present

* When the fault is no longer present, the DTC will be a history DTC

* A history DTC will clear after 50 ignition cycles

Reference Information

Schematic Reference

Door Lock/Indicator Schematics (See: Body and Frame/Locks/Diagrams/Electrical Diagrams/Door Lock/Indicator Schematics)

Connector End View Reference

Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)

Description and Operation

Power Door Locks Description and Operation (See: Body and Frame/Locks/Power Locks/Description and Operation)

Electrical Information Reference

* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit

Testing/Circuit Testing)

* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic

Procedures/Connector Repairs/Connector Repairs)

* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General

Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)

* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring