BMW 228i-BMW OPERATING FLUIDS - AUTOMATIC TRANSMISSION TECHNICAL SERVICE

BMW 228i-BMW OPERATING FLUIDS - AUTOMATIC TRANSMISSION TECHNICAL SERVICEAuto Worldzz# BMW #228i BMW OPERATING FLUIDS - AUTOMATIC TRANSMISSION TECHNICAL SERVICE. BMW OPERATING FLUIDS - AUTOMATIC TRANSMISSION TECHNICAL SERVICE Reference Number(s): 24 07.13, Date of Issue: July 2013 Fluids and sealers that are described in this Operating Fluids manual are BMW approved. Using non approved fluids or sealers can lead to premature failure and will not be covered under Warranty. 1.0 GENERAL INFORMATION ON AUTOMATIC TRANSMISSION FLUIDS Automatic Transmission Fluid was developed especially for automatic transmissions. It requires additives which are carefully matched with each other, a high viscosity index and a solidification point below -40°F/-40°C. Friction behavior of Automatic Transmission Fluid in plate-type clutches under very different operating conditions is extremely important. Other important factors are: - Wear protection - Oil film shear resistance - Adhesive property - Oxidation resistance - Corrosion inhibition - Sludge prevention - Temperature-dependent viscosity changes - Compatibility with sealing materials. 2.0 OIL ADDITIVES Automatic transmissions are designed so that oil additives are not necessary. BMW disapproves the use of any oil additives and cannot accept the liability for any consequential damage which results from using oil additives.https://youtu.be/G7XLJmGf-Gs1329326104264515586

If you want to unsubscribe from these emails, please use this form.