- The fluid level in the automatic transmission is OK.
Cause
- Control module has an internal error.
REMEDY
- Disassemble and assemble automatic transmission using the repair instructions.
- Exchange electrohydraulic control unit.
Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 54553 73IMPORTANT NOTEFollowing the repair measures, the
following checks MUST be carried out using the Diagnosis Assistance System, menu 'Initial startup'
- Initial startup with manual settings input for new control unit
Continue with button "F2"
Warning!Communication with ECU required.
NO
Preconditions
- The fluid level in the automatic transmission is not OK.
Remedy
- Inspect oil level, adjust to correct level if necessary.
NOTE
- Refill oil in automatic transmission up to maximum oil level mark at oil temperature of 80锟斤拷 C.
- (Refer to repair instructions: automatic transmission 722.9)
Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 27 001 75Continue with button "F2"
Erase fault memory in control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)
Additional measures
- Erase fault memory in control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)
NOTE
- The fault memory is erased by pressing button "F2".
Continue with button "F2"
Warning!Communication with ECU required.
0736
Continuous camshaft adjustment ( LEFT ): Incorrect position of the exhaust camshaft (P0024)
No comments:
Post a Comment