2010 Cadillac Truck SRX AWD V6-3.0L Page 394

2010 Cadillac Truck SRX AWD V6-3.0L Page 394

- Parking Aid Front Sensor Right Corner Circuit Low Voltage/Open

DTC B0957 08

- Parking Aid Front Sensor Right Corner Circuit Performance - Signal Invalid

DTC B0957 21

- Parking Aid Front Sensor Right Corner Circuit Incorrect Period

DTC B0957 3A

- Parking Aid Front Sensor Right Corner Circuit Incorrect Component Installed

Diagnostic Fault Information

Circuit/System Description

The object sensors are 3-wire sensors that are used to determine the distance between the vehicle and an object of interest. The parking assist

control module supplies 8 V to the object sensors via the 8 V reference circuit and provides ground via the low reference circuit. The parking assist

control module triggers the sensors in a sequential loop. After each sensor transmits, the parking assist control module uses the sensor echo

received through the signal circuit to calculate the distance and position of an object.

Conditions for Running the DTC

* Ignition ON

* The park assist is activated. The activation takes place through putting in the reverse gear or through operating the park assist switch.

Conditions for Setting the DTC

B0954 01, B0955 01, B0956 01, or B0957 01

The parking assist control module has detected the voltage at the sensor circuit is greater than 11.5 V or the object sensor is not grounded.

B0954 06, B0955 06, B0956 06, or B0957 06

The parking assist control module has detected the voltage at the sensor circuit is less than 0.5 V.

B0954 08, B0955 08, B0956 08, or B0957 08

The parking assist control module has received an invalid signal.

B0954 21, B0955 21, B0956 21, or B0957 21

The object sensor determines no change in the position of an object while the vehicle is in motion.

B0954 3A, B0955 3A, B0956 3A, or B0957 3A

The parking assist control module determines the wrong sensor type is installed.

Action Taken When the DTC Sets

* The parking assist is disabled.