2000 Porsche Boxster (986) F6-2.7L Page 140

and one groove in the bushing is aligned with the bar --> Figure 8 -A, Arrow- in the gearshift bracket.

4.4 Carefully press the bushing into the gearshift bracket using a vice --> Figure 8 -B- . When doing this, ensure that the gearshift lever pin

is positioned in the bushing and the base of the bushing is flush with the --> Figure 8 -D- gearshift bracket.

4.5 Press the second bushing into the gearshift bracket in the same way --> Figure 8 -B-.

4.6 Check that the new gearshift lever moves smoothly in the bushing.

5. Concluding work:

5.1 Install gearshift bracket.

5.1.1 Insert the gearshift bracket and tighten nuts --> Figure 9 -A-.

Tightening torque: 10 Nm (7.5 ft-lb.)

5.1.2 Grease and attach selector cable --> Figure 10 -A-, than install protection cap --> 10 -B-.

5.1.3 Grease and fit shift cable --> Figure 10 -C-. To do this insert a large screwdriver through the side opening in the gearshift bracket and

press end of shift cable onto the ball head.

5.1.4 Insert support --> Figure 10 -D- in gearshift bracket and secure with locking clips --> Figure 10 -E-.

5.2 Check shifting in all gears.

5.3 Install center console --> POSES, Workshop Manuel Serv. No. 6817 - "Installing center console".

5.4 Install right front seat --> POSES, Workshop Manuel, Serv. No. 7201 - "Installing front seat".