Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action if hydraulic clutch in automatic transmission fails to cut out
1. Remedial action if hydraulic clutch in automatic transmission fails to cut out
Operation number of operation texts and work units or standard texts and flat rates:27-0641Remedy
- Check and, if necessary, correct oil level of automatic transmission.
Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 27401 B1 END OF TEST
ME9.7
Control module has an internal error. (P0607)
Possible cause:
- Test control unit.
Affected functions:
- Engine diagnosis
-------------------------------------------------
Test 1: Test control unit.
1. Test control unit.
Test control unit.
Possible cause and remedy
- Erase fault memory and start engine.
- Reread fault memory of control unit N3/10 (ME-SFI [ME] control unit).If fault reoccurs, replace component N3/10 (ME-SFI [ME] control
unit).
Read coding and transfer to the new control unit.End of test
722.9 (7-gear) ETC2 as of 2008
The gear is implausible or the transmission is slipping.
Possible cause:
- Mechanical or hydraulic defect in the transmission
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action on implausible gear or slipping transmission
1. Remedial action on implausible gear or slipping transmission
Operation number of operation texts and work units or standard texts and flat rates:27-0641Remedy
- Check and, if necessary, correct oil level of automatic transmission.
Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 27401 B2 If complaint persists:Please contact the relevant product
service department.END OF TEST
ME9.7
Control module has an internal error. (P0607)
No comments:
Post a Comment