Monday, March 9, 2020

2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 2827


- X63/4 (CAN databus adapter connector, 2-pin)



- Test connectors and wiring for CAN of engine compartment CAN control modules.



- Control unit



Communication with ECU required ( Measuring system )



2. Drive train CAN test



Warning!Communication with ECU required.



EC415



One or more signals sent from control unit N47-5 (ESP and BAS control module) via the CAN bus is implausible.



Possible cause:



- N47-5 (ESP control unit)



Affected functions:



- CAN Communication



- Automatic transmission Function



-------------------------------------------------



Test 1: Fault in CAN communication with control unit N47-5 (ESP control unit).



Test 2: Fault in CAN communication with control unit N47-5 (ESP and BAS control module).



1. Fault in CAN communication with control unit N47-5 (ESP control unit).



Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING



- This is not a function error of control module Y3/8n4 (Fully integrated transmission control (VGS) control unit) and does not justify



replacement.



Possible cause for the entry of this event code



- Operational fault of component N47-5 (ESP control unit)



Possible measures



- Read out fault memory of control unit N47-5 (ESP control unit).



- Process displayed fault codes in control module N47-5 (ESP control unit).



End of test



2. Fault in CAN communication with control unit N47-5 (ESP and BAS control module).



Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING



- This is not a function error of control module Y3/8n4 (Fully integrated transmission control (VGS) control unit) and does not justify



replacement.



Possible cause for the entry of this event code



- Operational fault of component N47-5 (ESP control unit)



Possible measures



- Read out fault memory of control unit N47-5 (ESP control unit).



- Process displayed fault codes in control module N47-5 (ESP control unit).



End of test



EC423



One or more signals sent from control unit A1 (Instrument cluster) via the CAN bus is implausible.



Possible cause:



- A1 (Instrument cluster)



Affected functions:



- CAN Communication



- Automatic transmission Function

No comments:

Post a Comment