2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 1123

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 1123

DTC P0605

- Control Module Programming Read Only Memory Performance

DTC P0606

- Control Module Processor Performance

DTC P0610

- Control Module Vehicle Options Incorrect

DTC P0614

- Engine Control Module/Transmission Control Module Programming Not Plausible

DTC P0630

- VIN Not Programmed or Mismatched - Engine Control Module (ECM)

DTC P06D1

- Control Module Ignition Coil System Circuitry Performance

DTC P160D

- Incorrect Engine Calibration Detected

DTC P160E

- Engine Calibration Monitoring Not Programmed

DTC P161C

- Tire Size Not Programmed

DTC P2610

- Control Module Ignition Off Timer Performance

Circuit/System Description

This diagnostic applies to internal microprocessor integrity conditions within the engine control module (ECM). This diagnostic also addresses if

the ECM is not programmed, or is programmed incorrectly.

Conditions for Running the DTC

P0602, P0603, P0604, P0605, P0610, P0614, P0630, P160D, P160E, P161C

These DTCs run continuously when the ignition is ON.

P0606

DTC P0606 runs continuously when the engine speed is greater than 1,200 RPM.

P06D1

* The engine is running.

* The engine speed is less than 5,000 RPM.

* The battery voltage is between 10-18 V.

* DTC P06D1 runs continuously when the above conditions are met.

P2610

DTC P2610 runs continuously when the engine speed is greater than 240 RPM.

Conditions for Setting the DTC

The ECM detects an internal failure or incomplete or incorrect programming.

Action Taken When the DTC Sets

* DTCs P0602, P0603, P0604, P0605, P0606, P0610, P0614, P0630, P160D, and P160E are Type A DTCs.

* DTCs P06D1 and P2610 are Type B DTCs.

* DTC P161C is a Type C DTC.

Conditions for Clearing the DTC

* DTCs P0602, P0603, P0604, P0605, P0606, P0610, P0614, P0630, P160D, and P160E are Type A DTCs.

* DTCs P06D1 and P2610 are Type B DTCs.