- G3/3 (Left O2 sensor, before TWC [KAT])
Affected functions:
- Engine diagnosis
- Exhaust system
-------------------------------------------------
Test 1: Check component G3/3 (Left O2 sensor, before TWC [KAT]).
1. Check component G3/3 (Left O2 sensor, before TWC [KAT]).
Warning!Communication with ECU required.
2225
The left fuel level sensor has a short circuit to positive.
Possible cause:
- N10/2 (Rear SAM control unit with fuse and relay module)
- Check the CAN communication with control unit A1 (Instrument cluster).
- Interior CAN bus
Affected functions:
- Fuel level indicator
- Engine running
-------------------------------------------------
Test 1: Interior CAN bus
Test 2: CAN communication is faulty.
Test 3: Check component N10 (SAM control unit).
1. Interior CAN bus
Warning!Communication with ECU required.
2. CAN communication is faulty.
Test 2.1: Check the CAN communication with control unit A1 (Instrument cluster).
2.1. Check the CAN communication with control unit A1 (Instrument cluster).
Test 2.1.1: Check the CAN communication with control unit.
2.1.1. Check the CAN communication with control unit.
Warning!Communication with ECU required.
3. Check component N10 (SAM control unit).
Possible cause and remedy
- Read out fault memory of control unit N10/2 (Rear SAM control unit with fuse and relay module).
End of test
2216
Check component Y3/8s1 (Selection range sensor (VGS)). The adaptation sequence occurred outside the valid range.
Possible cause:
- Y3/8s1 (Selection range sensor (VGS))
No comments:
Post a Comment