Saturday, December 7, 2019

2010 Cadillac Truck Escalade RWD V8-6.0L Hybrid Page 723

2010 Cadillac Truck Escalade RWD V8-6.0L Hybrid Page 723

* Steering Wheel Control Switch Assembly Replacement (See: Accessories and Optional Equipment/Sensors and Switches - Accessories and

Optional Equipment/Steering Mounted Controls Assembly/Service and Repair)

* Control Module References (See: Testing and Inspection/Programming and Relearning) for BCM replacement, setup, and programming

B3819

DTC B3819, B3820, B3822, or B3823

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC B3819 00

- Left Rear Window Up Control Circuit

DTC B3820 00

- Left Rear Window Down Control Circuit

DTC B3822 00

- Right Rear Window Up Control Circuit

DTC B3823 00

- Right Rear Window Down Control Circuit

Diagnostic Fault Information

Circuit/System Description

The body control module (BCM) monitors the window UP/DOWN command from the driver door switch (DDS). When the rear window UP or

DOWN command is received, the BCM sends a signal to the appropriate rear window switch. The rear window switches continuously monitor the

up and down signal circuits, if no function is being commanded, the signal voltage is at approximately B+ voltage. If the UP or DOWN function is

No comments:

Post a Comment