- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action if faulty voltage supply to rpm sensors ( Overvoltage )
1. Remedial action if faulty voltage supply to rpm sensors ( Overvoltage )
Operation number of operation texts and work units or standard texts and flat rates:27-0641Cause
- The voltage supply of the speed sensors is faulty.(Overvoltage)
REMEDY
- Disassemble and assemble automatic transmission using the repair instructions.
- Exchange electrohydraulic control unit.
Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 54553 73IMPORTANT NOTEFollowing the repair measures, the
following checks MUST be carried out using the Diagnosis Assistance System, menu 'Initial startup'
- Initial startup with manual settings input for new control unit
Continue with button "F2"
Warning!Communication with ECU required.
0712
The signal from component Y3/8s2 (Transmission oil temperature sensor (VGS)) is implausible. ( Undervoltage )
Possible cause:
- Y3/8s2 (Transmission oil temperature sensor (VGS))
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action for an implausible signal from component Y3/8s2 (Transmission oil temperature sensor (VGS))
1. Remedial action for an implausible signal from component Y3/8s2 (Transmission oil temperature sensor (VGS))
Operation number of operation texts and work units or standard texts and flat rates:27-0641POSSIBLE CAUSES
- Component Y3/8s2 (Transmission oil temperature sensor (VGS)) is defective.
No comments:
Post a Comment