- Component B14 (Ambient temperature display temperature sensor) is defective.
End of test
NO
The actual value is not o.k.Possible cause and remedy
- Check lines from B14 (Ambient temperature display temperature sensor) to N10/1 (Driver-side SAM control unit with fuse and relay module)
for Short circuit or open circuit.
- Component N10/1 (Driver-side SAM control unit with fuse and relay module) is defective.
End of test
1.2. Check component B2/5b1 (Intake air temperature sensor).
Test 1.2.1: Check component B2/5b1 (Intake air temperature sensor) using actual value.
Test 1.2.2: Check plausibility of actual value B2/5b1 (Intake air temperature sensor) in control module ME 9.7.
Test 1.2.3: Check internal resistance of component B2/5b1 (Intake air temperature sensor).
1.2.1. Check component B2/5b1 (Intake air temperature sensor) using actual value.
Test prerequisites
- Switch off ignition.
- Leave vehicle with engine hood open for > 12 h.
Note
- The test prerequisites must be fulfilled for the test result to be meaningful.
No comments:
Post a Comment