Jaguar S-Type (X200) V6-3.0L Technical Service Bulletin # ST211-006 Date: 060407
Steering - Fluid Reservoir Replacement Criteria Update
NUMBER:
ST211-006
MODEL:
S-TYPE
DATE: APRIL 07, 2006
SECTION: 211-02
2000 Jaguar S-Type (X200) V6-3.0L Page 41
Power Steering Reservoir Replacement
AFFECTED VEHICLE RANGE:
Jaguar S-TYPE
VIN:
L00600 onwards
Model Year:
2000 onwards
CONDITION SUMMARY:
WORKSHOP MANUAL CHANGES FOR REPLACING THE POWER STEERING RESERVOIR
This bulletin has been issued to inform dealers of a GTR Workshop Manual change that provides specific conditions that must be met before
replacing the power steering reservoir.
Situation:
Currently the vehicle workshop manual stipulates that the power steering reservoir must be replaced when the power steering gear, power steering
pump or power steering cooler are being replaced.
Action:
Jaguar chassis engineering has determined that the reservoir will only require replacement when certain conditions are met. Refer to the Repair
Procedure detailed in this bulletin to determine if the reservoir requires replacement.
PARTS:
No parts required. Information purposes only.
WARRANTY:
NOTE:
SRO times for power steering gear, pump and cooler replacement have been revised accordingly. Global Technical Referance (GTR) Workshop
Manual section 211-02 Power Steering has been revised to reflect this procedure change.
Normal warranty policy and procedures apply.
REPAIR PROCEDURE
INSPECT POWER STEERING RESERVOIR FOR PROPER OPERATION
NOTE:
GTR lookup sequence is as follows:
GTR Home>NAS>Service Information/X200 - S-TYPE/>Workshop Manuals> S-TYPE Workshop Manual>Bookmark "Chassis/Steering
System/211-02: Power Steering">Link "Power Steering Fluid Reservoir (57.1 5.08)"
NOTE:
If the power steering gear, pump or cooler are being replaced for leakage or noise related issues and there is no evidence of fluid
contamination, the reservoir should not be replaced.
Procedure to determine power steering fluid contamination may be found in GTR section 211-00, Diagnosis and Testing, Power Steering
System Fluid Condition Check.
1. Replace the power steering reservoir only if any of the following conditions apply:
^ Reservoir bottle housing is split
^ Reservoir bottle port is crushed
^ Fluid is grossly contaminated with particulate matter, which may or may not result in a loss of function from the power steering system.
2. If particulate contamination is observed, but the steering system functions normally, drain the fluid from the system, replace the reservoir, and
flush the steering system completely with fresh fluid.
2000 Jaguar S-Type (X200) V6-3.0L Page 42
No comments:
Post a Comment