DisclaimerJaguar S-Type (X200) V6-3.0L Technical Service Bulletin # JTB00092 Date: 080314
Steering - Revised Steering Gear Removal/Installation
NUMBER: JTB00092
(Issue 1)
MODEL: S-TYPE, X-TYPE, XJ
DATE: 14 MMM 2008
SECTION: 211
2000 Jaguar S-Type (X200) V6-3.0L Page 342
Revised Workshop Procedure - Remove/Install Steering Gear
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
Situation:
A new workshop procedure has been developed for the removal and installation of the steering gear. It is no longer necessary to remove the road
wheels or track rod ends.
Action:
In the event you should have to remove / install the steering gear, follow the Repair
Procedure outlined below.
PARTS:
No parts required
TOOLS:
No special tools required
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.
Always refer to DDW to obtain the latest repair time.
2000 Jaguar S-Type (X200) V6-3.0L Page 343
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE:
REMOVAL AND INSTALLATION: STEERING GEAR
NOTE:
GLOBAL TECHNICAL REFERENCE (GTR) LOOKUP SEQUENCE IS AS FOLLOWS:
GTR HOME> NAS > MODEL> CHASSIS > WORKSHOP MANUAL> 211: STEERING SYSTEM> 211-02: POWER STEERING
1. Refer to Workshop Manual (GTR) section 211-02: Power Steering, for the revised removal/installation instructions.
No comments:
Post a Comment