Sunday, August 4, 2019

Disclaimer2010 Land Rover LR4 (LA) V8-5.0L Technical Service Bulletin # TECLTB00246 Date: 091117

Disclaimer2010 Land Rover LR4 (LA) V8-5.0L Technical Service Bulletin # TECLTB00246 Date: 091117



Body - Liftgate 'HSE' Emblem Missing



No: LTB00246



Issue: 1



Date: 17 NOV 2009



SECTION: 501



'HSE' Tailgate Badge Not Installed



AFFECTED VEHICLE RANGE:



LR4 (LA) HSE models only VIN: AA513326 - AA518891 (see list of VINs not affected)



Model Year: 2010



CONDITION SUMMARY:



Situation:



On HSE models only, the 'HSE' tailgate badge may have not been installed during manufacturing.



Action:



In the event of a missing HSE tailgate badge, refer to the Repair Procedure outlined below to install a new badge.



PARTS:



DAM500520LQV......HSE badge Qty: 1



TOOLS:



Refer to Workshop Manual (GTR) for any required special tools



WARRANTY:



NOTE:



Warranty claims should be submitted as a shortage claim. Repair procedures are under constant review, and therefore times are subject to change;



2010 Land Rover LR4 (LA) V8-5.0L Page 117



those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.



DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.



REPAIR PROCEDURE



INSTALL HSE BADGE



1. Ensure vehicle is at room temperature.



2. Clean the lower-right corner of the upper tailgate.



3. Remove new badge backing.



4. Beginning at the bottom of the 'E' of the badge, locate the new badge as indicated. (Figure 1).



5. Roll the new badge into place with a roller.



6. Remove top carrier from the badge.



List of VINs Not Affected

No comments:

Post a Comment