Remedy
- Inspect oil level, adjust to correct level if necessary.
NOTE
- Refill oil in automatic transmission up to maximum oil level mark at oil temperature of 80锟斤拷 C.
- (Refer to repair instructions: automatic transmission 722.9)
Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 27 001 75Continue with button "F2"
Erase fault memory in control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)
Additional measures
- Erase fault memory in control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)
NOTE
- The fault memory is erased by pressing button "F2".
Continue with button "F2"
Warning!Communication with ECU required.
162A00
The 'fuel pump' control unit is malfunctioning.
Test 1: Replace control module N118 (Fuel pump control module).
Test 2: Possible cause:
- Replace control module N118 (Fuel pump control module).
Affected functions:
- Engine diagnosis
- Fuel system
1. Replace control module N118 (Fuel pump control module).
When exchanging component N118 (Fuel pump control module) and returning for investigation, the control unit log must be enclosed.Remove old
control unit and install new control unit.After replacing control unit N118 (Fuel pump control module), perform initial startup.
2. No further information available.
No comments:
Post a Comment