Test signal cable to component B11/15 (PremAir sensor).
Test sequence
- Switch off ignition.
- Detach coupling at component B11/15 (PremAir sensor).
- Connect socket box (126-pin) to component N3/10 (ME-SFI [ME] control unit).
- Measure resistance with multimeter between socket [F.28] 124 of the 126-pole socket box tester and socket [B11/15] 2
Specified value
- Resistor[< 1 ]ohms
Question
- Is the measurement value OK?
No comments:
Post a Comment