2020 BMW 128i Coupe (E82) L6-3.0L (N51) Diagnostic Trouble Codes ( DTC ): Service instruction
none
2D1D
2D1D - P164C
Information saved in
DME
Fault code
2D1D - P164C
Fault text
Accelerator-pedal module, pedal-position sensor 1, voltage supply
Fault description
Pedal Position Sensor Potentiometer Supply Channel 1 Electrical
Condition for fault identification
Test condition:
Pedal-position sensor monitor Terminal condition: Terminal 15 ON Voltage condition:
Voltage in onboard electrical system >= 10 V
Condition for fault memory entry
0.02 sec.
Action in service
Check fault memory for problem with throttle valve and/or main relay, replace main relay as indicated
Check power-supply wire for short to ground (also measure in PWG),
Replace DME
Fault effect and breakdown warning
Driver information
Warning light:
CC status report: Reduced engine power!
EML ON restricted PW gradient and PW limit via rpm
No comments:
Post a Comment