2020 BMW 128i Coupe (E82) L6-3.0L (N51) Diagnostic Trouble Codes ( DTC ): Service instruction
none
(DME) Condition For Fault Memory Entry - 1
2CA7 - P0155
Information saved in
DME
Fault code
2CA7 - P0155
Fault text
Oxygen sensor heating before catalytic converter 2, function
Fault description
O2 Sensor Heater Circuit (Bank 2 Sensor 1)
Condition for fault identification
Test condition:
Check O2 sensor heater; sensor too cold Terminal condition: Terminal 15, engine on Voltage condition:
none
Condition for fault memory entry
O2 sensor temperature < 680 锟斤拷C for more than 5 sec.
Action in service
Visual inspection of wires, DME plug and O2 sensor for damage
Check wires (including resistance)
Check plug-in connections DME <=> Wiring harness
<=> Upstream (pre-cat) O2 sensor for Bank 2 (water or corrosion in the plug? => Repeatedly disconnect the plug and then FIRMLY press it back in)
Replace O2 sensor
Replace DME
Fault effect and breakdown warning
Driver information Warning light: MIL ON
No comments:
Post a Comment