Sunday, July 28, 2019

2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 648


Test prerequisites



- Actuation of component M33 (electric air pump) is not OK.



Test sequence



- Switch off ignition.



- Connect socket box (126-pin) to component N3/10 (ME-SFI [ME] control unit).



- Measure direct current with multimeter between sockets [F.2] 98 and [F.19] 115 of the 126-pole socket box tester.



- Switch on ignition.



Warning!Perform the measurement only for a short time so that component M33 (electric air pump) does not overheat.Specified value



- Amperage[0.1...0.3] A



- Component M33 (electric air pump) is switched on and is heard to run.



Question



- Is the measurement value OK?



YES



The measurement value is OK.Question



- Does component M33 (electric air pump) run during the current measurement?



YES



The test was okay.End of test



NO



Test actuation of component M33 (electric air pump).



Figure legend:1



- M33 (electric air pump)



Figure legend:2



- N10/1kR (Air pump or oil cooler fan relay)



Test sequence



- Switch off ignition.



- Detach coupling at component M33 (electric air pump).



- (M33) Measure direct voltage with multimeter between 2 and 1 (M33)



- Switch on ignition.



- Insert bridge for actuating component N10/1kR (Air pump or oil cooler fan relay).:

No comments:

Post a Comment