2010 Land Rover Range Rover (LM) V8-5.0L SC Technical Service Bulletin # Q160 Date: 120305
Campaign - Front Drive Halfshaft Outboard Boot Degradation
Q160NAS1
05 MAR 2012
**THIS SERVICE ACTION IS VALID FOR A LIMITED TIME ONLY
AND WILL EXPIRE ON 28 FEBRUARY 2014**
SECTION: 205
Service Action: Front Drive Halfshaft Outboard Boot Degradation
AFFECTED VEHICLE RANGE:
Range Rover (LM)
VIN: AA321 929 - AA327050
Model Year: 2010
2010 Land Rover Range Rover (LM) V8-5.0L SC Page 41
CONDITION SUMMARY:
Situation:
A limited number of 2010 model year Range Rover vehicles within the VIN range above may have been manufactured away from process and in
some cases the front drive halfshaft outboard constant velocity (CV) boot could split at the small diameter convolute. Should this occur, grease could
leak from the joint, leading to a potential noise I vibration concern. In an extreme case of grease loss where the vehicle driver ignores the warning
signs (noise I vibration), the halfshaft CV joint may fail.
Action:
Retailers are required to HOLD all affected vehicles in the above VIN range that are in their control and refrain from releasing the vehicles for new
or used vehicle sale pending completion of the rework action detailed in this Technical Bulletin. Affected vehicles already in the hands of customers
should be updated at the next available opportunity. At the time of customer appointment, ensure that all outstanding service campaigns for each
individual vehicle are identified and allocate sufficient time and resources to complete all campaigns.
PARTS:
LR032577 CV joint Qty: 2 (maximum)
LR036114 Boot kit Qty: 1
TOOLS:
Refer to Workshop Manual for any required special tools
WARRANTY:
NOTE:
Always check DDW to verify that the vehicle is affected by this Service Action or any other campaign prior to undertaking any repair.
DDW reflects only those vehicles affected and un-repaired.
NOTE:
Repair procedures are under constant review and therefore times and prices are subject to change; those quoted here must be taken as guidance
only. Always refer to DDW to obtain the latest repair time.
Warranty claims should be submitted quoting the Program Code 'Q160' together with the relevant Option Code; this will result in payment of the
stated time. As Option Codes are used, there is no requirement to enter SRO information; these are displayed for information only. The option that
allows for drive in / drive out may only be claimed if the vehicle is brought back into the workshop for this action alone to be undertaken.
This Service Action is valid for a limited time only and will expire on 28 February 2014. All Warranty claims up to this date must be submitted for
payment within 30 days of completion of the repair.
Normal Warranty policies and procedures apply
REPAIR PROCEDURE
INSPECT / REPLACE FRONT DRIVE HALFSHAFT OUTER BOOTS / CV JOINTS
WARNING:
Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
2010 Land Rover Range Rover (LM) V8-5.0L SC Page 42
1. Refer to Workshop Manual, section 100-02: Jacking and Lifting, and raise and support the vehicle.
NOTE:
It is necessary to replace only the CV joint(s) which display signs of complete loss of grease or water or debris ingress into the CV joint(s).
2. Inspect the left-hand (LH) and right-hand (RH) front drive halfshafts outer CV joint boots for signs of grease leakage:
^ If a boot(s) displays a complete loss of grease or water or debris ingress into the CV joint, refer to Workshop Manual, section 205-04: Front
Drive Halfshaft, and replace the affected CV joint(s) only.
^ If a boot(s) does not display a complete loss of grease or water or debris ingress into the CV joint, refer to Workshop Manual, section
205-04: Front Drive Halfshaft, and replace front drive halfshaft outer CV joint boots only.
No comments:
Post a Comment