Mercedes-Benz A220 2020 Technical Service Bulletin # LI58-40_P-048513 Date: 091124

Computers/Control - XD/DAS Add-Ons Software Update

DAS/XD ADD-ON 2009-10-29-1294 FOR PASSENGER CARS

Topic number LI58.40-P-048513

Version 1

Design group 58.40 Workshop equipment/MB testers

Date 11-24-2009

Validity DVD version 10/2009

Reason for change

Reason for block

Complaint:

AAC

Model series: 221, 216

Fault code 963C is set and AC OFF cannot be activated

ISM

Model series: 164, 212, 216, 221, 251

Control unit programming for hardware object number 0054461710 reports:

"The following control unit software versions

are available for control unit programming: 0114489610, 0124484610." After control unit programming, the control unit cannot be started up.

ETC

Model series: 204

Control unit programming for software object number 0024484710 reports: "No newer control unit software found".

Mercedes-Benz A220 2020 Page 277

DTR

Model series: 216

Control unit programming for software object number 2164420400 reports: "No newer control unit software found".

ME 2.7.2

Model series: 230

Control unit programming for various hardware object numbers reports: "No newer control unit software found".

CDI6

Model series: 164

Control unit programming for hardware object number 6429010400 reports: "No newer control unit software found".

CDI6

Model series: 164, 251

Control unit programming for software object numbers 642 902 69 00, 642 903 53 00 and 642 903 54 00 reports: "No newer control unit software

found".

Front SAM

Model series: 164, 251

Control unit programming for software object numbers 164 442 17 00 and 164 442 33 00 reports: "No newer control unit software found".

ESP

Model series: 207

Control unit programming for software object numbers 212 442 19 53 and 212 902 04 00 reports: "No newer control unit software found".

ICM

Model series: 212

Control unit programming for various hardware object numbers reports: "No newer control unit software found".

TGW

Model series: 204

Control unit programming for hardware object numbers 204 870 15 89, 204 870 17 90, 204 870 70 89 and 204 870 79 90 reports: "The following

control unit software versions are available for control unit programming: 204 902 15 01 and 204 902 30 01" After control unit programming, the

control unit cannot be started up.

Cause:

For all complaints: XD and DAS diagnostic data.

Remedy:

DAS/XD add-on 2009-10-29-1294 for passenger cars:

This add-on can be installed over DAS/XD version 10/2009.

This add-on does not supersede any other add-ons and must be additionally installed.

Mercedes-Benz A220 2020 Page 278

Symptoms

Control unit/fault code

Mercedes-Benz A220 2020 Page 279