2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Technical Service Bulletin # TECLTB00248 Date: 091217

2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Technical Service Bulletin # TECLTB00248 Date: 091217

Suspension - Correct Ball Joint Splitter Usage

No: LTB00248

Issue: 1

Date: 17 DEC 2009

SECTION: 204

Correct Procedure for Ball Joint Splitter Use

AFFECTED VEHICLE RANGE:

All

CONDITION SUMMARY:

Situation:

For information only, informing the Authorized Retailers of the correct procedure for using the Ball Joint Splitter (tool number 205-754A).

Action:

In the event it becomes necessary to use the Ball Joint Splitter (205-754A), refer to the Service Procedure outlined below.

PARTS:

No parts necessary; information only

TOOLS:

205-754A .................Ball joint splitter

Normal warranty policy and procedures apply.

SERVICE PROCEDURE

CAUTION:

Do not use air tools.

1. Ensure ball joint splitter (205-754A) is correctly fitted to the ball joint.

2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Page 333

^ To allow for equal loads during operation, ensure the ball joint splitter is set so the top and bottom sections are parallel. ((4) Figure 1)

CAUTION:

During operation, the ball joint may be displaced from the vertical link and the ball joint splitter may be separated from the ball joint.

2. Tighten the ball joint splitter forcing screw to 60 Nm (45 lbf ft). ((3) Figure 1)

CAUTION:

During operation, the ball joint may be displaced from the vertical link and the ball joint splitter may be separated from the ball joint.

^ If the ball joint has not been displaced, use a suitable tool and strike the top of the ball joint splitter ((1) Figure 1), introducing a shock to displace