- Erase fault memory and start engine.
- Reread fault memory of control unit N3/10 (ME-SFI [ME] control unit).If fault reoccurs, replace component N3/10 (ME-SFI [ME] control
unit).
Read coding and transfer to the new control unit.End of test
2. No further information available.
0890
Control module has an internal error. (P0607)
Possible cause:
- Test control unit.
Affected functions:
- Engine diagnosis
-------------------------------------------------
Test 1: Test control unit.
1. Test control unit.
Test control unit.
Possible cause and remedy
- Erase fault memory and start engine.
- Reread fault memory of control unit N3/10 (ME-SFI [ME] control unit).If fault reoccurs, replace component N3/10 (ME-SFI [ME] control
unit).
Read coding and transfer to the new control unit.End of test
0891
Control module has an internal error. (P0607)
Possible cause:
- Test control unit.
Affected functions:
- Engine diagnosis
-------------------------------------------------
Test 1: Test control unit.
1. Test control unit.
Test control unit.
Possible cause and remedy
- Erase fault memory and start engine.
- Reread fault memory of control unit N3/10 (ME-SFI [ME] control unit).If fault reoccurs, replace component N3/10 (ME-SFI [ME] control
unit).
Read coding and transfer to the new control unit.End of test
722.9 (7-gear) ETC2 as of 2008
Hydraulic fault in transmission (disengaging shift element does not disengage).
Possible cause:
- Mechanical or hydraulic defect in the transmission
No comments:
Post a Comment