Campaign PC024 - A/T Fluid Level Inspection

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Technical Service Bulletin # 10-004 Date: 100128

Campaign PC024 - A/T Fluid Level Inspection

Reference:

NTB10-004

Date:

January 28, 2010

VOLUNTARY SERVICE CAMPAIGN

2009-2010 ALTIMA HEV TRANSAXLE FLUID LEVEL

CAMPAIGN ID #:

PC024

APPLIED VEHICLES:

2009 - 2010 Altima Hybrid (L32HV)

Check Service COMM to confirm campaign eligibility.

INTRODUCTION

A small number of MY 2009 and 2010 Altima Hybrid Vehicles may have been manufactured with the incorrect fluid level in the transmission. To

correct this possible condition, Nissan will inspect the transmission fluid level and, if necessary, adjust the level free of charge for parts or labor.

IDENTIFICATION NUMBER

Nissan has assigned identification number PC024 to this campaign. This number must appear on all communications and documentation of any

nature dealing with this campaign.

DEALER RESPONSIBILITY

Dealers are to repair vehicles falling within range of this campaign that enter the service department. This includes vehicles purchased from private

parties, vehicles presented by transient (tourist) owners, and vehicles in a dealer's inventory.

SERVICE PROCEDURE

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 389

1. Raise the vehicle.

2. Locate the transaxle filler plug (see Figure 1).

3. Remove the filler plug and discard the filler plug gasket.

4. Check the transaxle fluid level.

^ Refer to Figure 2, oil level "A".

Minumum oil level is 5 mm below the filler

plug opening.

^ Add fluid if necessary.

CAUTION:

^ ONLY use Nissan Matic W ATF

^ P/N 999MP-MTW00P

5. Put a new gasket on the filler plug.

6. Install the filler plug. Torque to 39.2 N.m (4.0 kg-m, 29 ft-lb).

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 390

PARTS INFORMATION

CLAIMS INFORMATION

Submit a "CM" line claim using the claims coding shown.

"CM" I.D.: PC024

Disclaimer

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 391