2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Technical Service Bulletin # TECLTB00121 Date: 080229

2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Technical Service Bulletin # TECLTB00121 Date: 080229

A/T - Revised Valve Body Removal/Installation Procedure

No.: LTB00121

Issue: 1

Date: 29 FEB 2008

SECTION: 307

Revised Workshop Procedure - Remove / Install Automatic Transmission Valve Body Assembly

AFFECTED VEHICLE RANGE

CONDITION SUMMARY:

Situation:

A revised workshop procedure has been developed for the removal and installation of the automatic transmission valve body assembly. The revised

procedure removes the oil pan and valve body together, eliminating the removal of the engine mounts and engine lifting.

Action:

When removing / installing the automatic transmission valve body, refer to the Repair Procedure outlined below.

PARTS:

No parts required.

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.

Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

REPAIR PROCEDURE

REMOVING / INSTALLING THE AUTOMATIC TRANSMISSION VALVE BODY ASSEMBLY

2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Page 239

NOTE:

Global Technical Reference (GTR) lookup sequence is as follows:

GTR Home> NAS >Model > Service Information> Model Year> Workshop Manuals> 3: Powertrain > 307: Automatic

Transmission/Transaxle

1. Refer to Workshop Manual (GTR) Section 307-01A or 307-01B Automatic Transmission/Transaxle (44.40.01) for the revised removal /

installation procedure.