2010 Land Rover LR4 (LA) V8-5.0L Technical Service Bulletin # Q0932 Date: 100401
Campaign - Quality Assurance Program
No: Q093
Issue: 2
Date 01 APR 2010
ISSUE '2' CHANGES ARE HIGHLIGHTED IN GRAY AND SHOWN BY ASTERISKS
THIS SERVICE ACTION IS VALID FOR A LIMITED TIME ONLY AND EXPIRES ON
31 MARCH 2012
SECTION:418
SERVICE ACTION: LR4 / Range Rover Sport Assurance Program AFFECTED VEHICLE RANGE:
2010 Land Rover LR4 (LA) V8-5.0L Page 128
LR4 (LA)
VIN: AA508020-AA536055
Model Year: 2010
Range Rover Sport (LS)
VIN: AA208007-AA244700
Model Year: 2010
CONDITION SUMMARY:
Situation:
In order to ensure that 2010 model year LR4 and Range Rover Sport vehicles are fitted with the very latest software to further enhance the vehicle
owners experience, affected vehicles may require a number of module software updates and the vehicle battery condition tested and, if necessary,
replaced. The actions that may require parts and/or a repair will provide the following enhancements:
^ Battery condition test / replacement - rectifies the possible non-start of customer vehicles The software module updates will provide the
following enhancements:
^ Body Control Module (BCM) software update - enhances battery durability
^ Driver and Passenger Memory Seat Modules software update - enhances battery durability
^ Keyless Vehicle Module (KVM) software update - ensures a reliable start process
^ Immobilizer Antenna Unit (IAU) software update - ensures the emergency start / keyless start backup process is functional
^ Driver and Passenger Door Modules software update - rectifies the rear door glass not closing
^ Range Rover Sport only: Dynamic Response Control Module software update - stops unnecessary warning message display
Action: Retailers are required to HOLD all affected vehicles in the above VIN range that are in their control and refrain from releasing the
vehicles for new or used vehicle sale pending completion of the rework action detailed in this Technical Bulletin. Affected vehicles in
the hands of owners should be repaired at the next available opportunity. At the time of customer appointment, ensure that all
outstanding service campaigns for each individual vehicle are identified and allocate sufficient time and resources to complete all
campaigns. For cars in Retailer inventory, this Service Action should be performed after completions of the vehicle Pre- Delivery
Inspection (PDI).
PARTS:
Interstate Battery H8-90 Qty: 1 (only if necessary)
TOOLS:
IDS with IDS-DVD121_V6.01 or later and Calibration 30 or later Land Rover-Approved Midtronics Vehicle Power Supply
WARRANTY:
NOTE:Always check DDW to verify that the vehicle is affected by this Service Action prior to
undertaking any repairs. Repair procedures are under constant review, and therefore times I prices are subject to change; those quoted here must
be taken as guidance only. Always refer to DDW to obtain the latest repair time.
Warranty claims should be submitted quoting Program Code Q093, Option Code X, and the relevant SROs. The SRO for drive in I drive out may
only be claimed if the vehicle is brought back into the workshop for this action alone to be undertaken.
This Service Action is valid for a limited time only and will expire on 31 March 2012. All Warranty claims up to this date must be submitted for
payment within 30 days of completion of the repair.
LR4 VEHICLES
NOTE:Warranty claims should be submitted quoting Program Code ~QO93~ together with Option Code ~x. and the relevant SROs.
Normal warranty policy and procedures apply.
RANGE ROVER SPORT VEHICLES
NOTE:
Warranty claims should be submitted quoting Program Code ~QO93~ together with Option Code ~x. and the relevant SROs.
2010 Land Rover LR4 (LA) V8-5.0L Page 129
Normal warranty policy and procedures apply.
REPAIR PROCEDURE
TEST VEHICLE BATTERY - LR4 VINS AA508020 - AA525032 ONLY;
RANGE ROVER SPORT VINS AA208007 - AA230615 ONLY
1. Using the Midtronics tester, determine the battery condition.
^ Record Midtronics tester code in vehicle file.
^ If Replace Battery or Bad Cell Battery is displayed, replace the vehicle battery.
^ For all other results, proceed to UPDATE VEHICLE MODULE SOFTWARE.
UPDATE VEHICLE MODULE SOFTWARE - ALL VINS AS APPROPRIATE
CAUTION:
Ensure all ignition 'ON' / ignition 'OFF' requests are carried out; failure to perform these steps may cause damage to control modules in the
vehicle.
CAUTION:
A Land Rover-approved Midtronics Vehicle Power Supply must be connected to the vehicle battery during IDS diagnosis / module
programming.
1. Connect the Land Rover-approved Midtronics Vehicle Power Supply to the vehicle battery.
NOTE:
IDS must be loaded with IDS-DVD121_V6.01 or later and Calibration File 30 or later.
2. Connect the IDS to the vehicle and begin a new Symptom Driven Diagnostics (SDD) session.
3. Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle.
4. From the Session Type selection screen, choose 'Campaigns'.
5. Follow on-screen prompts until the Recommendations tab is visible.
NOTE:
Only those modules requiring reconfiguration will show for the VIN range. Where required downloads are duplicate, SDD will only offer it
once.
6. From the list of recommendations, select Run for each of the following (one at a time; as necessary):
^ Configure existing module > Body control module
^ Configure existing module> Drivers seat module
^ Configure existing module > Passengers seat module
^ Configure existing module > Keyless vehicle module
NOTE:
Ignore the instruction to fit a new Immobilizer antenna unit (IAU) when instructed during the IAU configuration procedure.
^ Configure new modules> Immobilizer antenna unit
^ Configure existing module > Drivers door module
^ Configure existing module > Passengers door module
^ Configure existing module > Active ride control module (Dynamic Response)
^ Battery > Battery replacement (only if a new battery is installed)
7. Follow all on-screen instructions to complete these tasks.
8. Exit the current session.
2010 Land Rover LR4 (LA) V8-5.0L Page 130
9. Disconnect the IDS and the Midtronics Vehicle Power Supply from the vehicle.
10. Close all doors, tailgate, and hood.
11. Lock the vehicle; wait 10 seconds.
12. Unlock the vehicle; wait 10 seconds.
13. Repeat steps 11 and 12.
14. Verify radio (AM / FM / CD / SDARS) operation.
No comments:
Post a Comment