manuals for the latest information.2015 Audi A3 (8PA) L4-2.0L DSL Turbo (CBEA)Technical Service Bulletin # 970910 Date: 091211

Electrical - Int. No Start/Press Clutch To Start Message
90 Instrument cluster message "To start the engine press clutch" is not displayed
97 09 10
2022317/1
December 11, 2009
Page 189
Affected Vehicles
Condition
^ Vehicle sporadically does not start.
^ When starting the engine, the message "To start the engine press clutch" is not displayed in the instrument cluster.
Only vehicles with manual gearbox and without start-stop system are affected.
Technical Background
Software issue in the vehicle electrical control unit, J519 (address word 09).
Production Solution
Updated software in the vehicle electrical control unit, J519 (address word 09).
Service

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.


2. Update the vehicle electrical control unit (J519) using the SVM action code as listed in the table above if necessary.

Page 190
Warranty
Additional Information
The following Technical Service Bulletin will be necessary to complete this procedure:
^ TSB 2011732 00 Software Version Management (SVM), operating instructions.
All part and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Dept. and service manuals
for the latest information.
Page 191
Page 192
Page 193
Page 194
Attachment - 00 Software Version Management (SVM), operating instructions