2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Technical Service Bulletin # TECLTB00296 Date: 110218
Interior - Upper Glove Compartment Rattles
No: LTB00296 (Issue 1)
18 FEB 2011
SECTION: 501
Upper Glove Compartment Rattle
AFFECTED VEHICLE RANGE:
LR3 (LA) VIN: 5A000360 - 9A513325
Model Year: 2005 - 2009
Range Rover Sport (LS) VIN: 6A900290 - 7A999999
7A100000 - Onwards
Model Year: 2006 - Onwards
CONDITION SUMMARY:
Situation:
The upper glove compartment may exhibit a rattle. This may be caused by the upper glove compartment lid bump stop(s) being worn.
Action:
In the event of a customer concern of the above, refer to the Repair Procedure outlined below to install new upper glove compartment bump stops.
PARTS INFORMATION
TOOLS:
Refer to Workshop Manual for any required special tools
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE
INSTALL UPPER GLOVE COMPARTMENT LID BUMP STOPS
1. Open the upper glove compartment lid
2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Page 86
2. Remove the existing right-hand (RH) bump stop from the compartment liner. (Figure 1)
CAUTION:
Do not damage surrounding area.
3. Using a small screwdriver, carefully install the new bump stop. (Figure 2)
4. Twist! pull the bump stop lightly, ensuring it is fully seated. (Figure 3)
5. Repeat steps 2 - 4 on the left-hand (LH) bump stop.
No comments:
Post a Comment