2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Technical Service Bulletin # 09-105A Date: 100407
Navigation System - Software Update For Various Concerns
Classification: EL09-044
Reference: NTB09-105A
Date: April 7, 2010
NAVIGATION SYSTEM SOFTWARE UPDATE
This bulletin has been amended. Please discard previous versions.
APPLIED VEHICLES:2010 Altima (L32, CL32, & L32HV) Sedan, Coupe, & Hybrid
2010 Maxima (A35)
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 410
2010 370Z (Z34) Roadster (convertible)
APPLIED VINs: Altima built in this range: 1N4(*)L2(***)A(*) 100000 - 113343
Maxima built in this range: 1N4AA5A(**)AC 800020 - 821364
370Z built in this range: JN1AZ4F(**)AM 300062 - 301332
IF YOU CONFIRM
A customer reports any of the follow issues with their navigation system:
^ System reboots when making a Bluetooth(R) phone call
^ Lock-up when switching regions
^ A POI is listed in the wrong city
^ POI "Search by City" is not available in select Canadian Provinces
^ "House Number Field" is blank during voice destination entry
^ "Voice Destination Entry" cancels during "Calculate Route"
^ Certain cities are not available in destination "Select a City"
and
The navigation system Map Version is 09-10 MAP No.1.
ACTION
Install the navigation system software update per the Service Procedure in this bulletin.
SOFTWARE UPDATE DVDs (3 disc set) - REQUIRED FOR THIS PROCEDURE
^ Each dealer has been mailed one disc set, free of charge, from Clarion.
^ Should you require additional DVDs due to loss or damage, the DVDs can be ordered, free of charge, by contacting Clarion. Request reference
number DVD NTB09-105.
CLAIMS INFORMATION
Checking Navigation System Map Version
1. Turn the ignition ON.
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 411
2. Press the INFO button.
3. Select Navigation Version on the display screen.
4. Press the ENTER button.
5. Make sure Map Version is:
09-10 MAP No.1
NOTE:
^ If the Map Version is other then above, reprogramming is not needed:
^ Map Version after reprogramming is
09-10 MAP No.1b
SERVICE PROCEDURE
1. Attach a battery charger to the vehicle battery. Set the charger to a low charge rate (trickle charge).
NOTE:
This procedure (software update) will take several minutes with the ignition ON. Make sure to attach a battery charger to the vehicle battery.
2. Set the ignition to the ON position.
3. Insert disc 1/3 into the in-dash CD / DVD player.
^ For Altima; open the display by pressing the OPEN/TILT button to access the disc slot.
IMPORTANT:
Once reprogramming has started, make sure all 3 discs have been loaded into the CD / DVD player before stopping the procedure.
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 412
4. Wait for the program to load (progress bar will display).
5. When the program has finished loading:
^ Disc 1 will automatically eject, and
^ Program loading is completed" will display.
6. Remove disc 1/3 and install disc 2/3.
7. On the display screen; press "DVD Update" and then "yes".
8. Wait for update to complete - about 15 minutes.
9. When the update is complete the display screen will read "Eject the DVD to let the system reboot".
IMPORTANT:
Once reprogramming has started, make sure all 3 discs have been loaded into the CD / DVD player before stopping the procedure.
10. Eject and remove disc 2/3.
11. Wait for the system to reboot.
12. When the reboot is complete the display screen will read, "Please insert disc 3/3".
13. Insert disc 3/3.
14. Wait for loading to complete - 3 to 5 minutes (progress bar will display).
15. When loading is complete:
^ Disc 3/3 will automatically eject, and
^ "Program loading is completed" will display.
16. Remove disc 3/3.
^ Software update is complete.
^ For Altima: close the display by doing a "short" press of the OPEN/TILT button.
No comments:
Post a Comment