Friday, December 28, 2018

A/T - Gear Range Can't Be Engaged/No Power Flow


A/T - Gear Range Can't Be Engaged/No Power Flow



Gear range cannot be engaged / no power flow



Topic number LI27.60-N-048889



Version 1



Design group 27.60 Gearshift, control



Date 02-05-2010



Validity Model 906 with automatic transmission



Reason for change



Reason for block



Complaint:



Gear range cannot be engaged.



Automatic transmission has no power flow at selector lever position D or R.



Cause:



a) Shift cable not engaged at transmission termination point.



2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)



Page 95



b) Shift cable incorrectly adjusted.



Remedy:



a) Engage shift cable at transmission termination point. Check shift operation and adjust.



b) Adjust shift cable.



^ Shift mechanism and transmission in position D



^ Detach selector lever cover



^ Push sliding piece down; when it springs back the shift cable is adjusted (see Figures 1 and 2)



^ Check shift operation



Note:



Parts replacement is not necessary.

No comments:

Post a Comment