2010 Mercedes
Benz C 63 AMG Sedan (204.077) V8-6.3L (156.985)
Vehicle: Customer Interest
Interior - Noise Sources on Instrument Panel BR 204
Noise sources on instrument panel BR 204
Topic number L168.10-P-055895
Version 1
Design group 68.10 Instrument panel
Date 04-11-2013
Validity Model series 204
Reason for change
Complaint:
(Numbering in accordance with "Noise source overview.jpg" in attachment)
1. Glove box squeaks/rattles in top left area.
2. Creaking or friction noise in center console area at transition from lower
control panel to HVAC control panel.
3. Chatter/noise in area of center air vent/head unit (as of facelift).
4. Creaking/cracking noise in area of combination cover (as of facelift).
5. Noise from upper area of instrument cluster.
6. Noise in right instrument cluster area.
Attachments
Cause:
1. Breakthrough for glove box on crossmember sharp-edged (Attachment 1)
2. Cover of lower control panel makes contact on left side with cover of HVAC
control panel (Attachment 2)
3. Lower trim strip of center air vent touches bezel of head unit
4. The material pairing between the chrome rings and the combination cover
generates noise at potentially all points of contact (Attachment 4)
5. Relative movement of components to each other (Attachment 5)
6. Improper torque of attachment bolt (Attachment 6)
Attachments
Remedy:
1. Attach thin layer of felt to suspension at top left of glove box
(Attachment 1-2)
2. Apply felt tape to contact points on back side of lower control panel.
3. Attach adhesive pads lined with rubber on lower bar of center air vent
(Attachment 3-1 and 3-2)
4. Glue components using hot melt adhesive to each other (Attachment 4-1)
5. Attach felt tape to contact points and designated areas.
6. Tighten bolt and washer assembly to 2 Nm (Attachment 6)
Attachments
Symptoms
-----------------------------------------------------Page
1-----------------------------------------------------
No comments:
Post a Comment